Activity Questions: Clarity | IMAGINiT Support Activity Questions Helprace RSS https://imaginit.helprace.com/s2-clarity/questions/activity?format=rss Are there any issues with Clarity access as Autodesk rebrands ACC to Forma? Hello,

Wondering if Clarity team working with Autodesk found any issues with Clarity access to BIM 360 or ACC with Autodesk rebranding ACC to Forma?

Thanks,

Bruce

]]> Thu, 26 Feb 2026 17:48:12 +0000 https://imaginit.helprace.com/i838-are-there-any-issues-with-clarity-access-as-autodesk-rebrands-acc-to-forma https://imaginit.helprace.com/i838-are-there-any-issues-with-clarity-access-as-autodesk-rebrands-acc-to-forma Bruce Gunderson II Bruce Gunderson II Hello,

Wondering if Clarity team working with Autodesk found any issues with Clarity access to BIM 360 or ACC with Autodesk rebranding ACC to Forma?

Thanks,

Bruce

]]> Are there any issues with Clarity access as Autodesk rebrands ACC to Forma? Hello,

Wondering if Clarity team working with Autodesk found any issues with Clarity access to BIM 360 or ACC with Autodesk rebranding ACC to Forma?

Thanks,

Bruce

]]> Thu, 26 Feb 2026 17:48:12 +0000 https://imaginit.helprace.com/i838-are-there-any-issues-with-clarity-access-as-autodesk-rebrands-acc-to-forma https://imaginit.helprace.com/i838-are-there-any-issues-with-clarity-access-as-autodesk-rebrands-acc-to-forma Bruce Gunderson II Bruce Gunderson II Hello,

Wondering if Clarity team working with Autodesk found any issues with Clarity access to BIM 360 or ACC with Autodesk rebranding ACC to Forma?

Thanks,

Bruce

]]> Is there a way to use Clarity to publish a sheet set to our ACC Docs platform? Looking to see if this is a workflow we can implement with our Model publishing and ACC Docs workflow.

]]> Wed, 21 Jan 2026 20:47:49 +0000 https://imaginit.helprace.com/i826-is-there-a-way-to-use-clarity-to-publish-a-sheet-set-to-our-acc-docs-platform https://imaginit.helprace.com/i826-is-there-a-way-to-use-clarity-to-publish-a-sheet-set-to-our-acc-docs-platform Maya Mashiach Maya Mashiach Looking to see if this is a workflow we can implement with our Model publishing and ACC Docs workflow.

]]> Clarity ACC Docs to PDF Task Fails When Exporting Multiple Revit Files I am facing an issue with the Clarity ACC Docs to PDF task when attempting to export multiple Revit files at the same time. Observed Behavior: When running the ACC Docs to PDF task for multiple Revit models, the task fails. The error indicates that Files are in use. I retried the export several times, but the same issue occurs consistently. Please advise whether this behavior is a known limitation or requires specific configuration settings to handle multiple Revit exports in the ACC Docs to PDF workflow.

]]> Tue, 03 Feb 2026 05:20:44 +0000 https://imaginit.helprace.com/i833-clarity-acc-docs-to-pdf-task-fails-when-exporting-multiple-revit-files https://imaginit.helprace.com/i833-clarity-acc-docs-to-pdf-task-fails-when-exporting-multiple-revit-files Roshan Raut Roshan Raut

I am facing an issue with the Clarity ACC Docs to PDF task when attempting to export multiple Revit files at the same time.

Observed Behavior:

  • When running the ACC Docs to PDF task for multiple Revit models, the task fails.
  • The error indicates that Files are in use.
  • I retried the export several times, but the same issue occurs consistently.
Please advise whether this behavior is a known limitation or requires specific configuration settings to handle multiple Revit exports in the ACC Docs to PDF workflow.
]]> Clarity ACC Docs to PDF Task Fails When Exporting Multiple Revit Files I am facing an issue with the Clarity ACC Docs to PDF task when attempting to export multiple Revit files at the same time. Observed Behavior: When running the ACC Docs to PDF task for multiple Revit models, the task fails. The error indicates that Files are in use. I retried the export several times, but the same issue occurs consistently. Please advise whether this behavior is a known limitation or requires specific configuration settings to handle multiple Revit exports in the ACC Docs to PDF workflow.

]]> Tue, 03 Feb 2026 05:20:44 +0000 https://imaginit.helprace.com/i833-clarity-acc-docs-to-pdf-task-fails-when-exporting-multiple-revit-files https://imaginit.helprace.com/i833-clarity-acc-docs-to-pdf-task-fails-when-exporting-multiple-revit-files Roshan Raut Roshan Raut

I am facing an issue with the Clarity ACC Docs to PDF task when attempting to export multiple Revit files at the same time.

Observed Behavior:

  • When running the ACC Docs to PDF task for multiple Revit models, the task fails.
  • The error indicates that Files are in use.
  • I retried the export several times, but the same issue occurs consistently.
Please advise whether this behavior is a known limitation or requires specific configuration settings to handle multiple Revit exports in the ACC Docs to PDF workflow.
]]> Is there a way to use Clarity to publish a sheet set to our ACC Docs platform? Looking to see if this is a workflow we can implement with our Model publishing and ACC Docs workflow.

]]> Wed, 21 Jan 2026 20:47:49 +0000 https://imaginit.helprace.com/i826-is-there-a-way-to-use-clarity-to-publish-a-sheet-set-to-our-acc-docs-platform https://imaginit.helprace.com/i826-is-there-a-way-to-use-clarity-to-publish-a-sheet-set-to-our-acc-docs-platform Maya Mashiach Maya Mashiach Looking to see if this is a workflow we can implement with our Model publishing and ACC Docs workflow.

]]> DWG to PDF (Civil3D) Parameters Can anyone tell me what the parameters of a DWG file or DST file needs to look like for Clarity to pick up the PDF task correctly. Do we need to have a certain layout setup or wondering why only some DWGs in a DST get picked up by Clarity for printing, but not all. Hoping for some insight on the setup process, as it has not worked for us consistently at all.

]]> Wed, 21 Jan 2026 20:51:05 +0000 https://imaginit.helprace.com/i827-dwg-to-pdf-civil3d-parameters https://imaginit.helprace.com/i827-dwg-to-pdf-civil3d-parameters Maya Mashiach Maya Mashiach Can anyone tell me what the parameters of a DWG file or DST file needs to look like for Clarity to pick up the PDF task correctly. Do we need to have a certain layout setup or wondering why only some DWGs in a DST get picked up by Clarity for printing, but not all. Hoping for some insight on the setup process, as it has not worked for us consistently at all.

]]> Is there a way to use Clarity to publish a sheet set to our ACC Docs platform? Looking to see if this is a workflow we can implement with our Model publishing and ACC Docs workflow.

]]> Wed, 21 Jan 2026 20:47:49 +0000 https://imaginit.helprace.com/i826-is-there-a-way-to-use-clarity-to-publish-a-sheet-set-to-our-acc-docs-platform https://imaginit.helprace.com/i826-is-there-a-way-to-use-clarity-to-publish-a-sheet-set-to-our-acc-docs-platform Maya Mashiach Maya Mashiach Looking to see if this is a workflow we can implement with our Model publishing and ACC Docs workflow.

]]> De-active projects do they still run? If you set a project to de-active and still have the tasks set to run and do not have the set to on demand do, they still run?

]]> Fri, 02 Jan 2026 15:23:52 +0000 https://imaginit.helprace.com/i824-de-active-projects-do-they-still-run https://imaginit.helprace.com/i824-de-active-projects-do-they-still-run Lisa Sprague Lisa Sprague If you set a project to de-active and still have the tasks set to run and do not have the set to on demand do, they still run?

]]> De-active projects do they still run? If you set a project to de-active and still have the tasks set to run and do not have the set to on demand do, they still run?

]]> Fri, 02 Jan 2026 15:23:52 +0000 https://imaginit.helprace.com/i824-de-active-projects-do-they-still-run https://imaginit.helprace.com/i824-de-active-projects-do-they-still-run Lisa Sprague Lisa Sprague If you set a project to de-active and still have the tasks set to run and do not have the set to on demand do, they still run?

]]> For BIM360 / ACC projects, can Clarity detect the upgrade and adjust the Clarity Project Settings accordingly? We've had a few cases where projects were upgraded on ACC and the BIM Manager forgot to go to Clarity and ugrade the project there and tasks just stopped running. Is it possible for Clarity to just do this on it's own?

]]> Fri, 05 Apr 2024 18:06:55 +0000 https://imaginit.helprace.com/i608-for-bim360-acc-projects-can-clarity-detect-the-upgrade-and-adjust-the-clarity-project-settings-accordingly https://imaginit.helprace.com/i608-for-bim360-acc-projects-can-clarity-detect-the-upgrade-and-adjust-the-clarity-project-settings-accordingly Eric Stimmel Eric Stimmel We've had a few cases where projects were upgraded on ACC and the BIM Manager forgot to go to Clarity and ugrade the project there and tasks just stopped running. Is it possible for Clarity to just do this on it's own?

]]> Multiple PDFs Saved to Source File Locations We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Mon, 13 Oct 2025 20:23:56 +0000 https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations Neil Osher Neil Osher We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Task Timeline visiblity How can I control visibility of task timeline to be visible to project users?

Is it only available for admins? 

]]> Fri, 03 Oct 2025 09:47:17 +0000 https://imaginit.helprace.com/i797-task-timeline-visiblity https://imaginit.helprace.com/i797-task-timeline-visiblity Wojciech Wojciech How can I control visibility of task timeline to be visible to project users?

Is it only available for admins? 

]]> Multiple PDFs Saved to Source File Locations We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Mon, 13 Oct 2025 20:23:56 +0000 https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations Neil Osher Neil Osher We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Multiple PDFs Saved to Source File Locations We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Mon, 13 Oct 2025 20:23:56 +0000 https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations Neil Osher Neil Osher We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Multiple PDFs Saved to Source File Locations We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Mon, 13 Oct 2025 20:23:56 +0000 https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations Neil Osher Neil Osher We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Can Clarity Push Browser Edits Back to Revit? (schedule, room information) Is it possible to edit a schedule or data sheet directly in the browser or in excel and have the updates pushed back to Revit when using Clarity - through reports or data sheets? or a task automation?

]]> Wed, 08 Oct 2025 07:20:12 +0000 https://imaginit.helprace.com/i799-can-clarity-push-browser-edits-back-to-revit-schedule-room-information https://imaginit.helprace.com/i799-can-clarity-push-browser-edits-back-to-revit-schedule-room-information Hafis.Jamal Hafis.Jamal Is it possible to edit a schedule or data sheet directly in the browser or in excel and have the updates pushed back to Revit when using Clarity - through reports or data sheets? or a task automation?

]]> Multiple PDFs Saved to Source File Locations We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Mon, 13 Oct 2025 20:23:56 +0000 https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations https://imaginit.helprace.com/i804-multiple-pdfs-saved-to-source-file-locations Neil Osher Neil Osher We have a single PDF task whose Scope is set to "File" with a wildcard so that it will go into each subfolder on ACC (Arch, Mech, Elec, Struct, Plumb, etc.) and print the predefined Print Set. We want the resulting PDFs to end up next to the source models they originated from on the ACC hub. The Post Action BIM 360/ACC upload will only send it to a single folder. We would rather not create a discreet task for each discipline (x7). Are there other task options we are missing?

]]> Navis 2026 Will Clarity get the ability to set the file format that NWDs and NWCs are saved in for Navis 2026? This is a new property setting.

]]> Thu, 09 Oct 2025 14:09:02 +0000 https://imaginit.helprace.com/i801-navis-2026 https://imaginit.helprace.com/i801-navis-2026 Derek Becher Derek Becher Will Clarity get the ability to set the file format that NWDs and NWCs are saved in for Navis 2026? This is a new property setting.

]]> Navis 2026 Will Clarity get the ability to set the file format that NWDs and NWCs are saved in for Navis 2026? This is a new property setting.

]]> Thu, 09 Oct 2025 14:09:02 +0000 https://imaginit.helprace.com/i801-navis-2026 https://imaginit.helprace.com/i801-navis-2026 Derek Becher Derek Becher Will Clarity get the ability to set the file format that NWDs and NWCs are saved in for Navis 2026? This is a new property setting.

]]>